Cobertor Inversor Solar Grande - Surf Mist (Universal)
Descripción
Acerca de este producto
Una cubierta para inversor solar especialmente diseñada que también luce genial. Nuestras cubiertas están hechas de aluminio de grado marino de nivel 5000 y recubiertas de polvo en el color Surf Mist Colorbond. El diseño incluye espacio libre en todos los lados para permitir espacio para el flujo de aire que mantiene fresco el inversor y un panel frontal que se abre para facilitar el acceso al inversor. También permite espacio para conductos e interruptores eléctricos.
Dimensiones máximas recomendadas del inversor
725 x 590 x 285 mm (alto x ancho x profundidad) : consulte las imágenes del producto para conocer las dimensiones detalladas.
Esta cubierta de inversor solar más grande está diseñada para adaptarse a inversores más grandes, incluidos:
Fronius Symo 10kw - 20kw
Y muchos más
¿No estás seguro de si tu inversor encajará? Mandanos un mensaje .
¿Buscas una funda más pequeña? Echa un vistazo a la cubierta para inversor solar de tamaño normal .
Cómo instalar
Las instrucciones de instalación se proporcionarán con su pedido. Su cubierta llegará en 4 piezas de cubierta principal junto con pernos y tornillos para el montaje y tornillos de pared para el montaje. En primer lugar, se unen las 4 piezas de la cubierta principal utilizando pernos y tornillos. Luego inserte 4 tornillos en la pared en el lugar de montaje y monte la cubierta en los tornillos usando los puntos de montaje en cada pata.
Cómo ver su inversor
Para ver su inversor, simplemente retire los tornillos de mariposa en la parte inferior del panel frontal. Levante el panel frontal para acceder fácilmente a su inversor.
Dimensiones del producto
745 x 783 x 310 mm (alto x ancho x fondo)
Franqueo disponible en toda Australia.
FAQ
Use this text to share information about your product or shipping policies.
Do your covers suit my solar inverter, battery or my space?
Our solar inverter covers are designed to suit most solar inverters. Please check your solar inverter dimensions and compare them with the inverter cover dimensions found on the product page before making a purchase. When reviewing the inverter or battery cover dimensions, you should try to maintain a minimum clearance between the cover and your inverter or battery of 30mm. This is to allow for airflow and heat dissipation.
Where can I find product dimensions?
Product dimensions can be found on in the images on the product page.
How long does delivery take?
Orders are generally processed the same day with delivery dates varying according to your location. Once you order has been booked for collection, you will receive a tracking email that includes an estimated delivery date. We have standard and express delivery options to choose from during checkout. Standard delivery can take anywhere from two up to nine days depending on your location. Express delivery can take 1-4 days depending on your location.
How much does postage cost?
Postage varies depending on the product and how many of them you order. For solar inverter covers and our universal battery cover, the postage cost is a flat $40 across Australia for one and $75 for two. For Tesla Powerwall covers, the postage cost is $75 for one cover and $115 for two covers.
How can I access my inverter or battery once the cover is installed?
Our inverter covers have a front panel that can be opened. To view your inverter, simply remove the thumb screws at the bottom of the front panel. Lift the front panel for easy access to your inverter.
Our battery covers use a 'key-hole' design on each leg where it attaches to your wall. To access your inverter all you need to do is lift and pull the cover so that the mounting screws pass through the key-hole on each leg. This allows you to remove the entire cover for easy access.
Do you make custom size covers?
No we do not make custom size covers. Instead we design our covers to suit most solar inverters and most batteries. If you have a special project in mind that requires a larger volume of covers then we are able to tailor our current designs to suit your needs.
Can solar inverters be installed outside? Can solar batteries be installed outside?
Yes. All solar inverters and solar batteries are designed be installed outside. At minimum these products come with IP65 ratings which meansthe product has the highest level of dust protection, and is able to withstand low-pressure water jets from all directions. In addition to this though, nearly all manufacturers state that your inverter or battery must be installed protected from direct sunlight. Check out our blog post about solar inverter warranties here.
Can you cover a solar inverter? Can you cover a solar battery?
Yes. As long as the inverter has sufficient space to allow the internal fan of your inverter to continue cooling then your inverter can be covered. A fully enclosed cover will not allow your inverter to keep itself cool. Our covers are designed to allow enough space for internal cooling as well as space for electrical switches and conduits. After speaking to many of the big inverter manufacturers, the general recommendation is to maintain at least 30mm between the cover and the inverter or battery. You should also use your own discretion as to what is suitable for your own particular installation as every home is different.
Do I really need a solar inverter cover? Do I really need a battery cover?
Adding a solar inverter cover or battery cover will extend the life of your system. If your inverter or battery is installed in direct sunlight or is exposed to rain we recommend adding a cover. The best place to have your solar inverter or battery installed is inside in the garage. But that isn't always possible. When your solar is installed outside, we've got you covered.
Can you install my cover?
No we do not install your cover for you. Anyone confident with hand tools such as a handyman will be able to install our covers in 10-15 minutes. We provide very clear and easy to follow instructions with every cover showing you how to assemble and install it. In most applications you'll only need a drill for mounting on your wall and one or two small hand tools assembling the cover.